Set of 6 pieces 3/8" bolt extractors for damaged bolts 2-10mm reversible direction Yato YT-0623 - Made in Poland

Technical specifications of  set of 6 3/8" broken screw extractors 2-10mm reversible Yato YT-0623:

• Brand: Yato
• Product code: YT-0623
• Standard: CE (Europe)
• Size: 2, 3, 4, 6, 8, 10 mm
• Material: 8660 steel
• Hardness: 49-52 HRC
• Number of details: 6
• Application: Removing broken bolts

Application of the set of 6 3/8" tools to remove broken screws from 2-10mm, reversing Yato YT-0623:
Yato YT-0623 set of 6 3/8" broken screw extractors 2-10mm is used specifically to remove broken screws, damaged heads, or stuck screws in the following cases:

• Repairing cars and motorbikes: When the bolts on the car are broken or damaged due to impact, rust, etc., we can use this extraction tool to remove them without having to break the structure of the part.
• Mechanical repair: During the process of repairing mechanical equipment, we may encounter broken screws or damaged heads. This extraction tool set will help remove these bolts effectively.
• Electrical appliance repair: Removing broken or damaged bolts on electronic devices is often difficult. This spit set will help make this job easier.
• Construction: In construction, we can use this extraction tool to remove broken or damaged screws on steel structures, concrete,...
• Repair of household appliances: Some household appliances such as fans, washing machines, refrigerators,... also use bolts to connect the details. When these bolts are broken or damaged, we can use this extraction tool to remove them.

Principle of operation of set of 6 3/8" tools for removing broken screws and bolts 2-10mm, reversing Yato YT-0623:

• Set of 6 3/8" reversible bolt extractors 2-10mm Yato YT-0623 operates on the principle of creating torque in the opposite direction of the bolt's twist to break the connection between the bolt and the material.
• Specifically, when the bolt is broken or the head is damaged, we use the sharp end of the extraction tool to bore a small hole into the center of the bolt. Then, we replace the sharp end with a screw head of the appropriate size for the bolt. Next, use a wrench or wrench to turn the screw head in the opposite direction of the bolt. This torque will act on the bolt, breaking the connection between the bolt and the material, thereby helping to pull the bolt out of position.

How to use of set of 6 3/8" tools to remove broken screws 2-10mm and reverse Yato YT-0623:

1. Determine the appropriate size: Choose an extraction head with a size appropriate to the diameter of the damaged bolt.
2. Drill a hole: Use the sharp end of the spatula to cut a small hole into the center of the bolt.
3. Install the screw head: Replace the pointed head with a screw head of the appropriate size for the bolt.
4. Turn in the opposite direction: Use a wrench or wrench to turn the screw head in the opposite direction of the bolt.
5. Pluck the bolt: Once the bolt has been loosened, you can use pliers or your hands to pull the bolt out of position.

Note of the set of 6 3/8" tools for removing broken screws 2-10mm, reversing Yato YT-0623:

• You should use enough force, avoid twisting too hard because it can damage surrounding materials.
• If the bolt is rusted, you should use a lubricating solution before operating.
• Be careful when using tools to avoid accidents.

Don't miss the opportunity to own a set of 6 3/8" Yato YT-0623 reversible 3/8" bolt and screw extractors to experience the convenience and efficiency!
Visit our website now to order products at preferential prices!