The hydraulic crimping tool set 16-300mm 18-20T Yato YT-22862 is a product from Poland.

Hydraulic crimping pliers set 16-300mm 18-20T Yato YT-22862  Poland - Optimal solution for electrical engineers
Electrical engineering is one of the professions that requires meticulousness, accuracy and carefulness. During the construction, maintenance, and repair of electrical systems, electrical engineers often have to perform crimping operations. This is a job that requires a lot of strength and ingenuity. If the press is not tight, the terminal will not be able to ensure good contact, leading to short circuits and electrical fires. On the contrary, if pressed too tightly, the tip may be deformed, making disassembly difficult.

Yato YT-22862 hydraulic crimping pliers is an optimal solution for electrical engineers. The product uses hydraulic pressure of up to 18-20 tons, helping to tighten large-sized cores easily, quickly and effectively.

Yato YT22862 hydraulic crimping pliers set

• Stable pressing ability: Even pressure helps firmly press the end of the rod, ensuring the safety of the electrical system.
• Safe to use: The pliers use hydraulic force, so they do not cause accidents like mechanical pliers.

Technical specifications of 16-300mm Yato YT-22862 Polish hydraulic crimping pliers

• Brand: Yato - Poland
• Product code: YT-22862
• Made in: Poland
• Application:
  • Electrical: Press the wire connector
  • Mechanical: Press cable and steel wire connectors
• Length: 470 mm
• Pressure: 18-20 tons
• Clamp jaw size:
  • Aluminum: 16-240 mm²
  • Copper: 16-300 mm²

• Product information

• Hydraulic plug, hand held to press cos head
• For effective crimping on electrical wires or steel wire
• Thanks to the hydraulic piston, pressing the large cos heads does not require much effort

Outstanding features of the Yato Tools brand pliers set:

• Anti-slip latch locks the mold
• The mold is divided in half
• Piston
• Plunger's rotating head
• Plunger main valve
• Moving arm of the plunger
• Handle cover
• Pressing range: Aluminum: 16-420mm², Copper: 16-300mm²
• Length: L=470mm
• Pressure: 18- 20 Ton
• Included terminal sizes:16 mm²,25 mm²,35 mm²,50 mm²,70 mm²,95 mm²,120 mm²,150 mm²,185 mm²,240 mm²,300 mm²

Explanation of some terms:

• Ton: Unit of force, equivalent to 1000 kg.
• Mm²: A unit of cross-sectional area, equivalent to 1/1,000,000 

Yato YT-22860 hydraulic press pliers set includes the following main parts:
Pliers body: Made from high-quality steel, high hardness, good strength. The pliers body has a sturdy design, helping the pliers operate stably and durably.

Plier body of Yato YT22862 Hydraulic Cos Press Pliers Clamp horn: Made from high-quality steel, has high hardness, good strength. The clamping horn has a V-shaped design, allowing the pliers to tightly clamp the cos head and cable.

• Cos tip: Made from copper or aluminum, sized to fit the cable to be pressed. The head has a ring-shaped design, helping to wrap and hold the cable tightly.

  

• Cos head of Yato YT22862 hydraulic cos press pliers

• Hand pump: Made from high quality steel, has high hardness, good strength. The hand pump has a handle-shaped design, making it easy for users to operate.

  

Container box: Made from high quality, highly durable plastic. The case helps store pliers and accessories safely.
Structural diagram of hydraulic cos press pliers  Yato  Poland

Principle of operation of Yato YT-22862 hydraulic press pliers
Yato YT-22862 hydraulic cos press pliers operate based on hydraulic mechanism. When the user pumps by hand, hydraulic oil will be pumped into the hydraulic cylinder. Hydraulic oil will create pressure, pushing the piston rod tightly against the cable.

The process of hydraulic cos pressing is as follows:

1. Prepare the head and cable to match the size of the clamp horn.
2. Route the cable through the cos head.
3. Place the cos tip in the middle of the clip horn.
4. Hand pump to create pressure.
5. When the pressure is large enough, the cos head will be pressed tightly against the cable.

Advantages of Yato YT-22862 Hydraulic Press Pliers

• Ability to firmly press the cos head to the cable, ensuring safety for the electrical system.
• Using a hydraulic mechanism, helps users easily perform the cos press operation without using much force.
• Sturdy handle design, covered with anti-slip plastic, making it easy for users to hold and operate.

Disadvantages of Yato YT-22862 hydraulic press pliers

• The price is higher than other mechanical pliers.

Yato YT-22862 hydraulic crimping pliers set is a high quality product, capable of firmly pressing the cos head to the cable, ensuring safety for the electrical system. The product is suitable for electricians, electrical engineers,... 

With the above outstanding advantages, Yato YT-22862 cos hydraulic crimping pliers is an indispensable product for engineers and electricians. If you are looking for a product to help solve the difficulties of pressing cos, choose Yato YT-22862 hydraulic cos presses.

Yato Tools – European Quality, Optimal Solutions for Industrial Applications

Yato Tools, founded in 1990 in Poland, is a leading brand specializing in hand tools and industrial equipment. With over 30 years of experience, Yato is present in over 100 countries and offers more than 14,000 products serving industries such as automotive, construction, industrial, electrical, and mechanical repair.

Yato products are manufactured to CE, ISO, and GS standards, ensuring high quality, safety, and exceptional performance. Yato Tools is the top choice for professionals, repair technicians, and businesses that demand reliable tools and long-lasting durability.

Kocu Vietnam is the exclusive distributor of Yato Tools in Vietnam, committed to offering genuine products, reliable after-sales service, and professional technical support.

Contact Us:

• Hotline: +84904613300 (Jessy) | +84936318800 (Taly)
• Website: www.yato.vn