Rubber suction cup set for Yato YT-25411 machine foot, 26 pieces - Poland

The Yato YT-25411 tripod rubber presser set is an indispensable tool in any auto repair workshop. With professional design and high quality, this product makes the process of disassembling and replacing chassis rubbers, bearings, and bearings faster, easier, and more accurate.

Features

• Material: Made from sturdy steel alloy, ensuring durability and high bearing capacity.
• Design: The product set includes 26 parts in many different sizes, suitable for a variety of vehicles and components.
• Uses:
• Remove all types of chassis rubber, tripod rubber, bearings, bearings.
• Used for cars from 4-30 seats and trucks from 0.5-1.4 tons.

Advantages:

• Save time and effort compared to manual methods.
• Avoid causing damage to machine parts.
• Easy to use, does not require high technology.
• Long lifespan, durable over time.

Application

• Remove and install underbody rubber: Used to easily and quickly remove and install all types of car underbody rubber.
• Remove and install the tripod rubber: Supports the removal and installation of the tripod rubber, helping to replace damaged or worn parts.
• Disassembly and assembly of other parts: Can be used to disassemble and assemble some other parts on the car such as bearings, bearings,...

Comparison with Other Products

• Compared to other bumper sets on the market, Yato YT-25411 stands out in terms of quality and durability. Cheap products often have less durable materials and are easily warped or broken during use. In addition, the accuracy of the details is also lower, easily causing damage to the vehicle's details.

Technical specifications:

• Brand: Yato - Poland
• Product code: YT-25422
• Standard: CE
• Material: Carbon Steel #45
• Number of details: 26
• Includes: 4 guide bolts 10mm/12mm/14mm/16mm (450mm long) including 11 piece yellow bush ball head bearings with dimensions: 46x36, 58x48, 70x60, 82x72, 44x34, 56x46, 68x58, 80x70, 54x44, 66x56, 78x68 9 bearings with dimensions: 52x42, 64x54, 76x66, 50x40, 62x52, 74x64, 48x38, 60x50, 72x62 two locating discs.

Principle of operation:

• This damper operates on the principle of pressure. When tightening the bolts, the parts of the fairing will press against the A-arm rubber or other parts that need to be removed and installed, creating enough force to separate them from their original position.

Instructions for use:

1. Prepare:

• Check the tool set: Make sure the set has all 26 parts and is not damaged.
• Prepare the vehicle: Place the vehicle on a stand or lift it with a hydraulic jack to ensure safety when working.
• Determine the position that needs to be removed: Identify the exact position of the A-arm rubber or the part that needs to be removed to choose the correct size of the parts of the fairing.

2. Steps:

• Remove surrounding details: Remove bolts, screws or other details that block access to the location to be removed.
• Choose the right size: Choose parts of the fork set that are sized to match the inner and outer diameters of the parts to be removed.
• Assemble the bumper: Assemble the parts of the bumper in the correct order and tighten the bolts to form a unified block.
• Place the fender in position: Place the fender in the position to be removed, making sure the parts of the fender are in even contact with the surface of the part to be removed.
• Tighten the bolts: Use a wrench or similar tool to evenly tighten the bolts of the bumper. Tighten slowly and evenly to avoid damaging the parts.
• Check and adjust: During the tightening process, observe changes in the parts to be removed. If the part still doesn't move, tighten the bolts more.
• Remove the fender assembly: Once the part has been separated, loosen the bolts and remove the fender assembly from its position.
• Remove the part that needs to be replaced: After removing the fairing, you can easily remove the part that needs to be replaced.
• Install new parts: Install new parts in position and tighten bolts and screws.

3. Note:

• Safety: Always wear gloves and goggles when working to avoid injury.
• Accuracy: Choose the correct size of the parts of the bumper to avoid damaging the parts.
• Slowly and evenly: Tighten the bolts slowly and evenly to avoid deforming the parts.
• Storage: After use, clean the tray and store in a cool, dry place.

More information:

• Application: This set of clamps is often used to remove and install A-arm rubber, tripod rubber, bearings and some other details on cars.
• Material: The fork set is usually made of sturdy steel alloy, ensuring durability and high accuracy.
• Size: The bumpers come in many different sizes to fit many different types of vehicles and details.

Note: The above instructions are for reference only. To ensure safety and effectiveness, you should refer to the user manual that comes with the product or seek the help of a professional repairman.

The Yato YT-25411 tripod rubber clamp A set is one of the high quality, reliable products on the market today. With outstanding advantages, this product will definitely be an effective companion for auto technicians.

Yato Tools – European Quality, Optimal Solutions for Industrial Applications

Yato Tools, founded in 1990 in Poland, is a leading brand specializing in hand tools and industrial equipment. With over 30 years of experience, Yato is present in over 100 countries and offers more than 14,000 products serving industries such as automotive, construction, industrial, electrical, and mechanical repair.

Yato products are manufactured to CE, ISO, and GS standards, ensuring high quality, safety, and exceptional performance. Yato Tools is the top choice for professionals, repair technicians, and businesses that demand reliable tools and long-lasting durability.

Kocu Vietnam is the exclusive distributor of Yato Tools in Vietnam, committed to offering genuine products, reliable after-sales service, and professional technical support.

Contact Us:

• Hotline: +84904613300 (Jessy) | +84936318800 (Taly)
• Website: www.yato.vn