3/4" Torque Wrench 865mm 100-500NM Yato YT-0770 from Poland

Flag lê force 3/4" L865mm 100-500NM Yato YT-0770 is made from chromium-vanadium steel, ensuring durability and durability. sure. Flag lê có tension structure lò mechanical spring, when the desired tightening force is achieved, lò The spring will jump one tooth, making a characteristic sound.

**The moment scale is located in the flag handle lê, có Can be adjusted by rotation. After setting the desired tightening torque, it is necessary to tighten the wrench. with the safety pin at the end of the handle. Flag lê có GS certification.
Compare the conversion units torque measurement

1 kGcm = 13.887 OZIN (ounce x inch)
1 kGcm = 0.867 LBIN (pounds x inches)
1 kGm = 9.80665 Nm (Newton x mét)
1 kGm = 7.233 LBFT (pounds x feet)
1 FTLB = 12 LBIN (pounds x inches)
1 dmN = 14.16 OZIN (ounces x inches)

The application of the product is to tighten threaded connections one way and at a time. can be found in many different fields, including:

• Techniques ô tô: Flag lê force is widely used in engineering ô tô to tighten bolts, screws, couplings, etc. in the engine, chassis, suspension, etc. Tightening force determines the tightening force. It is very important to ensure the threaded connection is tight, clear and clean. rust, ensuring safety for users.
• Mechanical Engineeringí: Flag lê Power is also used in many fields of mechanical engineering. different, such as machine manufacturing, construction,... to tighten threaded connections in machines, equipment, structures,...
• Electrical Engineering: Flag lê Force is used to tighten threaded connections in the electrical system, such as connectors, sockets, etc. Correct tightening force helps ensure the electrical system operates safely and efficiently.
• Construction techniques: Flagê Force is used to tighten threaded connections in construction sites, such as structural steel, plumbing,...
• Naval engineering: Flagê force used to tighten threaded connections in boats, such as engines, plumbing,...

Danger isý flag operation force 3/4" L865mm 100-500NM YATO YT-0770, flag stick có The length can be shortened according to usage needs

Flag lê force 3/4" L865mm 100-500NM Yato YT-0770 isà flag type lê force and capacity tension structure lò mechanical spring. When the desired tightening force is achieved, lò The spring will jump one tooth, making a characteristic sound.

Danger isý flag operation This capacity is as follows:

• Flag lê Made from chromium-vanadium steel, ensuring durability and durability. sure.
• Tension structureò The mechanical spring is placed in the flag handle lê.
• The moment scale is located in the flag handle lê, có can be adjusted by rotation.
• When tightening the bolt, lò xo will be trapped. When the tightening force reaches the limit; installation treatment, loò xo will jump a tooth, making a characteristic sound.

Specifically, quá The procedure for tightening the bolts is as follows:

1. Select scale Nm or in-lbs phù suitable.
2. Open the micrometer screw hole.
3. Turn the micrometer so that “0” on the scale of the screwdriver straight to the vertical line on the flagstick.
4. Turn the micrometer clockwise, until the desired torque is achieved.
5. The desired torque is set at the time the division on the micrometer screwdriver is in line with the vertical line on the wrench.
6. After that, it is necessary to screw in the micrometer and Set the rotation direction of the socket. suitable, then dó flag lê dã ready to use.
7. Placing the camera headù flag socket lê.
8. Tighten the bolt in the direction of rotation; installed.
9. When the torque is achieved, installation, loò The spring will jump one tooth, making a characteristic sound.
10. Unbolt the flag.

Advantages of lê force 3/4" L865mm 100-500NM YATO YT-0770

• Có High precision, ensuring precise tightening force as required.
• Flag lê có The length can be shortened according to usage needs, making operations easier.
• Có tension structure lò Mechanical springs, ensuring durability and xác.

Disadvantages of lê force 3/4" L865mm 100-500NM YATO YT-0770

• Giá The bar is higher than the flag. normal force.
• Needs to be carefully preserved to avoid impacts and falls.

Instructions for use at lê force 3/4" L865mm 100-500NM YATO YT-0770

1. Prepare :

• Check flag lê Before use, make sure the flag is lê not damaged or rusted.
• Select the appropriate outlet; appropriate to the size of the bolt to be tightened.
• Select scale Nm or in-lbs phù in accordance with tightening requirements.

2. Adjust the tightening force:

• Open the micrometer screw hole.
• Turn the micrometer so that “0” on the scale of the screwdriver straight to the vertical line on the flagstick.
• Turn the micrometer clockwise, until the desired torque is achieved.
• The desired torque is set at the time the division on the micrometer screwdriver is in line with the vertical line on the wrench.

3. Tighten the bolt

• Placing the camera headù flag socket lê.
• Tighten the bolt in the direction of rotation; installed.
• When the torque is achieved, installation, loò The spring will jump one tooth, making a characteristic sound.

4. Information about the fire

• Open the micrometer screw hole.
• Remove the block from the flag.

Save ý when using ignore lê force 3/4" L865mm 100-500NM YATO YT-0770

• Do not use flag lê passá tightening torque range for part.
• Do not use flag lê to tighten damaged threaded joints.
• Preserve flag lê in a different place Ráo, thámát.

Warranty

Product is warranted for 12 months.

If you are looking for a solution to tighten the thread connection, safely and securely. save costs, reduce costs flag lê force 3/4" L865mm 100-500NM Yato YT-0770 isà Choose the perfect name for you.

>To order products, please contact us via hotline 093.631.8800