Crimping pliers for network cables Yato YT-2294 - Made in Poland

Technical Specifications:

• Brand: Yato
• Model: YT-2294
• Functions: Wire cutting, insulation stripping
• Cutting Range F (mm²): 0.64-2.6
• Cutting Range F (AWG): 22~10
• Length: 165 mm
• Body Material: Carbon steel
• Surface Finish: Black, oxidized
• Cutting Blade Material: 65Mn steel
• Hardness: 50-53 HRC
• Handle Material: PVC
• Application: Electrical

Description:

• The YT-2294 pliers are made of thick, hardened carbon steel with a black, rust-resistant surface.
• The handles are protected by a dual-layer plastic shell.
• The cutting blade is hardened to a hardness of 50-53 HRC.
• The pliers have a spring-assisted mechanism.
• The pliers can strip insulation from round electrical wires with a cross-section from 0.64 mm² to 2.6 mm².
• The pliers can cut electrical wires.

Applications:

• The YATO YT-2294 Network Cable Crimping Pliers are used to crimp RJ-45 network connectors onto network cables.
• The pliers can crimp various types of network cables, including Cat5, Cat6, Cat7, etc.
• These pliers are widely used in the telecommunications, computer networking, etc.

Operating Principle:

• The YATO YT-2294 Network Cable Crimping Pliers operate based on the leverage principle.
• When the user squeezes the handles, the force is transmitted through the leverage system, causing the crimping head to move and press the network connector tightly onto the cable.
• The pliers have a mechanism to securely hold the network connector and cable during crimping.
• The crimping force can be adjusted using the knob on the handle.

Instructions for Use:

1. Select the appropriate network connector for the type of network cable.
2. Cut the network cable to the appropriate length.
3. Strip the cable insulation at the end.
4. Insert the cable end into the network connector.
5. Place the network connector in the crimping position on the pliers.
6. Squeeze the handles to crimp the network connector.
7. Check if the network connector is crimped securely.

Notes:

• Use the correct type of network connector for the network cable.
• Cut the network cable to the appropriate length.
• Carefully strip the cable insulation to avoid damaging the cable.
• Place the network connector in the crimping position accurately.
• Squeeze the pliers handles with the right amount of force.
• Do not use the pliers to crimp hard or sharp objects.
• Store the pliers in a dry, cool place.