Centrifugal polishing machine 720W Yato - Poland YT-82200

Here is a comparison between two car paint polishing machines: Yato YT-82200 eccentric and Yato YT-82197 concentric, so you can clearly understand the different uses of these two products:

1. Yato YT-82200 - Off-center polishing machine:

• Main Uses: Yato's YT-82200 eccentric polisher is mainly designed for polishing and renewing car surfaces. It helps remove light scratches, cracks, and dull spots on car paint surfaces.
• Eccentric Motion: This machine uses eccentric motion to perform the polishing process, helping to distribute the polishing coating more evenly and effectively.
• Speed ​​Control: YT-82200 has an electronic speed control system, allowing flexible rotation speed adjustment from 2100 to 5000 rpm.
• Main Application: Used to polish, create shiny surfaces, and protect car paint.
   

2. Yato YT-82197 - Concentric polishing machine:

• Main Uses: Yato's YT-82197 concentric polishing machine is mainly designed for polishing and renewing automotive paint surfaces as well as other flat surfaces.
• Concentric Motion: This machine uses concentric motion, which means the polishing disc and rotating shaft run simultaneously, creating a completely concentric motor. This helps the concentric polisher distribute polishing powder more effectively.
• Speed ​​Control: YT-82197 also has flexible speed control and can be used at low speeds.
• Main Applications: Used to polish, create shiny surfaces, and protect car paint, as well as for other flat surfaces such as wood, furniture, and floors.

Comparison Overview:

• YT-82200 (eccentric) is mainly used for polishing and maintaining car paint.
• YT-82197 (concentric) is suitable for many applications, including car paint polishing and polishing other flat surfaces.
• YT-82197 has the ability to distribute polishing powder more effectively thanks to the simultaneous movement of the head in two directions (rotational and elliptical motion).
• Both products have flexible speed control and a convenient design.

The choice between the two machines depends on your specific needs. If you mainly work with automotive paint, the YT-82200 (eccentric) may be a good choice. If you need to polish various flat surfaces, YT-82197 (concentric) will be more flexible.

INSTRUCTION FOR USING YATO YT-82200 CENTRAL POLISHING MACHINE :

Step 1: Prepare the Working Environment:

• Before starting, make sure you are working in a cool and comfortable environment.
• Make sure that the polisher and work surface are clean.

Step 2: Install the Polishing Disc:

• Choose the right polishing disc for your specific job (for example, a softer disc for polishing and a harder disc for scratch removal).
• Use the tool provided to install the polishing disc tightly onto the machine shaft.

Step 3: Prepare Polishing Powder:

• Use the appropriate polishing powder for your job.
• Make sure you have followed the instructions for using the polishing powder, including how much and how to use it.

Step 4: Connecting the Machine:

• Connect the polisher to a stable power source and have an energy saving mode.
• Make sure that the power cable is not wrapped around or secured around sharp edges to prevent fire.

Step 5: Adjust Speed:

• Use the speed controller to set the right rotation speed for your specific job.
• Start at a low speed and gradually increase if necessary.

Step 6: Using the Polisher:

• Place the polishing disc on the work surface and start the machine.
• Always maintain the sander in a horizontal position when working.
• Move the machine gently and evenly over the surface to be polished.
• Avoid applying too much pressure to the machine or work surface.

Step 7: Controlling Movement Direction:

• To change the direction of movement, you can adjust the tilt angle or hand direction of the sander.
• Always follow the manufacturer's instructions.

Step 8: Periodic Check:

• Regularly check the polisher to ensure that it is operating properly and safely.
• Ensure that mechanical parts are not damaged or in need of servicing.

Step 9: Shutdown and Clean Up:

• After completing work, turn off the machine and disconnect it from the power source.
• Clean the polisher and accessories, and store them safely.

Note that safety is always most important when using a polishing machine. Be sure to follow all manufacturer's instructions and always use personal protective equipment when working with the polisher.

SAFE USE INSTRUCTIONS YATO YT-82200 CENTRAL POLISHING MACHINE :

1. Read Instructions for Use:

• Before starting to use the machine, read the operating instructions carefully and understand all manufacturer's instructions and warnings.

2. Preparation Before Use:

• Make sure that the polisher and its accessories are properly and securely installed before use.
• Check the condition of the power cable and make sure there is no damage or damage.

3. Use Personal Protective Equipment:

• Always make sure you are using adequate personal protective equipment, including eye protection, ear protection, and a protective vest.
• The polisher should not be used in loose or unprotected clothing.

4. Check the Work Area:

• Before starting, make sure the work area is cool and free of fire hazards or spills of flammable liquids.
• Work in an environment with enough light to clearly observe the work and machinery.

5. Do not wear jewelry or loose clothing:

• Avoid wearing jewelry, necklaces, or any items that could get caught in the polisher.
• Do not wear loose clothing that could be pulled into the polishing disc.

6. Control Speed ​​Carefully:

• Use the speed controller to set the right rotation speed for your job.
• Do not change the rotation speed while the machine is operating.

7. Use the Correct Polishing Disc:

• Choose the right polishing disc for your specific job and install it properly.
• Make sure that the polishing disc is tightly installed on the machine shaft.

8. Monitoring the Polishing Machine During Operation:

• Always keep your eyes on the polisher throughout the process.
• Monitor the machine to ensure that it is operating normally and that no problems are occurring.

9. Turn Off Machine Before Changing Polishing Discs:

• Before changing the polishing disc or performing any servicing, turn off the machine and disconnect it from the power source.

10. Clean the Machine After Use:

• After completing the job, turn off the machine and clean the polisher, polishing discs, and accessories.
• Store the machine and its accessories in a cool, dry place.

Note that this is only a rough guide. Always follow the specific safety and use instructions of the Yato YT-82200 eccentric polisher from the manufacturer to ensure maximum safety when using this product.