The 550W Yato YT-82030 Electric Drill Machine - Made in Poland

Tortured by the noise when drilling walls? Tough materials make you "give up"?
Don't worry, the Yato YT-82030 550W Impact Drill is the perfect solution for you!

This product is your savior because:

• Powerful capacity of 550W combined with impact force of 31,000 times/minute helps you easily drill through all materials, from hard concrete to thick steel.
• No-load speed 0 - 2300 rpm allows you to adjust the speed to suit each type of material and usage needs.
• Ability to clamp drill bits from 1.5mm - 13mm to meet a variety of your drilling needs.
• Compact, lightweight design with a weight of only 1.8kg makes it easy to operate and use for a long time.
• Comes with an auxiliary handle, depth gauge and plastic suitcase for convenient storage and transportation.

Technical specifications of 550W Yato YT-82030 impact drill:

• Brand: Yato
• Product code: YT-82030
• Standard: CE (Europe)
• Power: 550W
• Voltage: 220V/50Hz
• No-load speed: 0 - 2300 rpm
• Pulsation force: 0 - 31,000 times/minute
• Drilling diameter: Concrete: 13mm, steel: 13mm, wood: 20mm
• Drill bit clamping capacity: 1.5mm - 13mm
• Weight: 1.8kg
• Accessories included: Extra handle, depth gauge, plastic suitcase

Applications of the 550W Yato YT-82030 impact drill:

• Drill holes in materials such as wood, steel, concrete.
• Screw screws.
• Used as a hammer to break hard materials.

Principle of operation of 550W Yato YT-82030 impact drill:

• The Yato YT-82030 impact drill operates on the principle of combining rotation and impact motion.
• When the electric motor operates, it will transmit force to the rotating shaft, causing the drill bit to rotate at high speed.
• At the same time, a part inside the machine will create a pounding motion in the axial direction, allowing the drill bit to drill through hard materials such as concrete.
• The beating speed and beating force of the machine can be adjusted with the knob on the machine body.

How to use the 550W Yato YT-82030 impact drill:

• Step 1: Install the drill bit into the drill.
• Step 2: Choose the appropriate operating mode: Normal drilling: Used for drilling wood, steel, plastic, dynamic drilling: Used for drilling concrete and stone.
• Step 3: Adjust the speed and impact force to suit the material to be drilled.
• Step 4: Turn on the machine and place the drill bit in the position to be drilled.
• Step 5: Squeeze the trigger to start drilling.
• Step 6: Adjust the pressure on the drill to ensure the best drilling efficiency.
• Step 7: After completing drilling, turn off the machine and remove the drill bit from the machine.

Notes about the 550W Yato YT-82030 impact drill:

• Read the instruction manual carefully before using the machine.
• Use labor protection gear when working with the machine.
• Do not use the machine in humid places or where there is a risk of fire and explosion.
• Store the machine in a cool, dry place when not in use.

Own the Yato YT-82030 550W Power Drill now to experience the difference!
Order today to receive special offers!