Electronic torque wrench 3/8" 3-30 Nm Yato YT-07894 from Poland

Yato YT-07894 3/8" electronic force scale: Accurate and safe force measurement solution
You are working in occupations that require high precision such as mechanics, electronics, construction, etc. You often have to perform tasks such as tightening and removing bolts, screws, etc. Are you worried that the tightening force is too strong or too light and will affect the structure of the product, causing unfortunate damage?

If so, the Yato YT-07894 3/8" electronic force scale is the perfect solution for you.

• Electronic force scale 3/8" 3-30 Nm Yato YT-07893 Poland is an accurate force measuring device, widely used in repair, installation,...
• The scale has a wide measuring range from 3 - 30 Nm, meeting a variety of needs.
• Accuracy ± 2%, resolution 0.1 Nm, ensuring accurate measurement results.
• Large LCD screen, easy to observe measurement results.
• Capacitive force sensor type, provides high durability, good resistance to vibration and shock.
• Compact design, easy to carry when using.

Technical specifications 3/8" 3-30 Nm electronic force scale Yato YT-07893 Poland

• Measuring range: 3 - 30 Nm
• Accuracy: ± 2%
• Resolution: 0.1 Nm
• Sensor type: Capacitive force sensor
• Screen: LCD screen
• Unit of measurement: Nm
• Power source: 2 x 1.5 V AA (battery)
• Dimensions: 175 x 75 x 40 mm
• Weight: 250 g

Features

• Yato YT-07894 electronic force scale has a measuring range from 3 to 30 Nm, accuracy ±2%, meeting diverse needs in industries such as mechanics, electronics, construction,...
• The scale has a compact design, light weight, easy to carry when working.
• 3/8" socket head is suitable for many common types of bolts and screws.
• The scale has an LCD screen that clearly displays measurement parameters.
• The force adjustment button has high sensitivity, helping users easily adjust the required force.

Yato YT-07894 electronic force scale uses the principle of elastic force sensing. The elastic force sensor is a system of flexible conductive cells attached to an elastic rod. When force is applied to the scale, the elastic bar expands and changes the electrical conductivity of the cells. Specifically, when placing an object whose force needs to be measured on the nozzle of the scale arm, the impact force of the object will cause the elastic bar inside the force sensor to bend. This bending changes the resistance of the conductive cells inside the force sensor. The electronic circuit inside the scale arm converts this resistance change into an electrical signal. This electrical signal is then displayed on the scale's LCD screen.

With this operating principle, the Yato YT-07894 electronic force scale has high accuracy, meeting the needs of use in industries requiring high precision such as mechanics, electronics, construction,...

Instructions for use

• To use the Yato YT-07894 electronic force balance, follow these steps:
  1. Install the tip into the scale arm.
  2. Adjust the force adjustment knob to the required force level.
  3. Place the socket head on the bolt or screw.
  4. Press the ON button to start measuring force.
  5. Read measurement results on LCD screen.

Maintenance

• To ensure that the 3/8" 3-30 Nm Yato YT-07893 Poland electronic force scale always operates correctly, you need to perform the following maintenance steps:
  • Wipe your hands with a soft, dry towel.
  • Do not let the scale hand come into contact with water or other liquids.
  • Avoid strong impact on the scale arm.
  • Replace batteries periodically.

Note

• Before using the 3/8" 3-30 Nm Yato YT-07893 Poland electronic force scale, you need to check whether the battery is installed correctly.
• To ensure accurate measurement results, you need to adjust the measuring head to match the bolts and screws to be measured.
• Do not use the scale arm if the scale arm is damaged.

Warranty

• Electronic force scale 3/8" 3-30 Nm Yato YT-07893 Poland has a genuine 6-month warranty.

Own the Yato YT-07894 electronic force balance right away to solve your difficulties and improve work efficiency. Contact us now to order!

Yato Tools – European Quality, Optimal Solutions for Industrial Applications

Yato Tools, founded in 1990 in Poland, is a leading brand specializing in hand tools and industrial equipment. With over 30 years of experience, Yato is present in over 100 countries and offers more than 14,000 products serving industries such as automotive, construction, industrial, electrical, and mechanical repair.

Yato products are manufactured to CE, ISO, and GS standards, ensuring high quality, safety, and exceptional performance. Yato Tools is the top choice for professionals, repair technicians, and businesses that demand reliable tools and long-lasting durability.

Kocu Vietnam is the exclusive distributor of Yato Tools in Vietnam, committed to offering genuine products, reliable after-sales service, and professional technical support.

Contact Us:

• Hotline: +84904613300 (Jessy) | +84936318800 (Taly)
• Website: www.yato.vn