Automotive brake fluid tester, 600mAh Yato YT-72986 - Poland

Yato YT-72986 brake fluid measuring device - A quick, accurate solution for checking brake fluid
Brake fluid is an important fluid in the braking system of cars and motorbikes. Brake fluid is responsible for transmitting force from the brake pedal to the brake pads, helping the vehicle stop safely. However, brake fluid also tends to age over time. When brake fluid ages, the ability to transmit force decreases, leading to the brake system operating ineffectively, which can even be dangerous. Previously, without support equipment, technicians checking brake fluid had to use manual methods. This method is quite complicated and time consuming. The technician must use a glass cup, pour brake fluid into the cup and observe the color of the brake fluid. If the brake fluid is yellow or brown, it has aged and needs to be replaced.

The Yato YT-72986 brake fluid measuring device is a perfect solution to help technicians check brake fluid quickly and accurately. The device uses the principle of measuring the resistance of brake fluid. New brake fluid has low moisture content and high resistance. Old brake fluid has high moisture content and low resistance. When inserting the probe into the brake fluid, the device will measure the resistance of the brake fluid and display the results on the LCD screen.

Yato YT-72986 brake fluid measuring device has the following outstanding advantages:

• Check brake fluid quickly, within 1 second.
• Accurate measurement results, meeting CE (European) standards.
• Easy to use, suitable for all audiences.
• Compact design, easy to carry.

Applications of the Yato YT-72986 brake fluid measuring device:
Yato YT-72986 brake fluid measuring device is used to check brake fluid for cars and motorbikes. The device can test DOT 3, DOT 4 and DOT 5.1 brake fluid.

Technical specifications of Yato YT-72986 car and motorbike brake fluid measuring device

• Brand: Yato - Poland
• Product code: YT-72986
• CE standards (Europe)
• Application: Checking the quality of brake fluid DOT 3, DOT 4 and DOT 5.1
• Operating temperature range: -20 ~ +70 ˚C
• Storage temperature: -30 ~ +50 ˚C
• Power source: Rechargeable battery
• Weight: 130 g
• Voltage: 3.7 V d.c.
•  Sonda : 21cm
• Screen type: LCD
• Battery capacity: 600 mAh
• Data hold function: Yes
• LED backlight: Yes
• LED indicator: Yes
• Operating relative humidity Rh: < 80 %
• Charging port: USB-C
• Audio signaling function: Yes
• Battery power: 2.22 Wh

Detailed information:

• Brake fluid measuring device DOT3, DOT4, DOT5.1.
• Easy to read results thanks to large LCD screen.
• Sonda is safe to use thanks to its 21 cm long elastic probe.
• Brake fluid meter powered by a 600 mAh battery, charged with a USB Type-C cable.
• Moisture-proof IP67.
• There is a built-in LED backlight.
• Audible warning of high moisture level in brake fluid.
• Product set includes charging cable.

Yato YT-72986 brake fluid measuring device uses the principle of measuring the resistance of brake fluid. New brake fluid has low moisture content and high resistance. Old brake fluid has high moisture content and low resistance. When inserting the probe into the brake fluid, the device will measure the resistance of the brake fluid and display the results on the LCD screen.

Specifically, the device has an elastic probe 21 cm long. This probe is made of conductive material, with stable resistance. When the probe is inserted into the brake fluid, a small voltage is applied to the probe. This voltage will pass through the brake fluid and create an electric current. This current will be proportional to the moisture content of the brake fluid.

The device has an electronic circuit to measure this current. The electronic circuit will convert current into voltage and display the results on the LCD screen.

The device's LCD screen has high resolution, making it easy for users to read results. The device also has LED backlighting to help users use the device in low light conditions.

In addition, the device also has a number of other features such as:

• Data retention function: Helps users store measurement results for future reference.
• LED indicator light: The blue LED light will light up when the brake fluid is new, the red LED light will light up when the brake fluid is old.
• Sound signal function: The device will emit a sound signal when the brake fluid has high humidity.

Yato YT-72986 brake fluid measuring device is a useful tool to help users check the quality of car and motorbike brake fluid. The device has a compact design, is easy to use and has high accuracy.

Instructions for using Yato YT-72986 brake fluid measuring device

1. Inspect the device: Before use, check the device for damage. If there is any damage, please do not use the device.

2. Charging: The device is powered by a 600 mAh battery. Before use, fully charge the battery using the included USB Type-C charging cable.

3. Turn on the device: To turn on the device, press and hold the power button for 3 seconds.

4. Select brake fluid type :The device can test DOT 3, DOT 4 and DOT 5.1 brake fluid. To select the type of brake fluid, press the "Mode" button.

5. Place the probe into the brake fluid: Place the probe into the brake fluid so that the probe is completely submerged in the brake fluid.

6. Read results: Measurement results will be displayed on the LCD screen.

7. Handle the results: Based on the measurement results, treat the brake fluid as follows:

• If the measurement result is between 1.2 and 1.6 kΩ, the brake fluid is new and can be used again.
• If the measurement result is between 1.6 and 2.0 kΩ, the brake fluid has begun to age and needs to be replaced soon.
• If the measurement result is greater than 2.0 kΩ, the brake fluid is seriously aged and should be replaced immediately.

8. Turn off the device: To turn off the device, press and hold the power button for 3 seconds.

Note

• Do not use the device in wet or dusty conditions.
• Do not use the device in extremely high or low temperatures.
• Do not let the device fall or receive strong impacts.
• Clean the device regularly with a soft cloth.

Device maintenance

• After use, fully charge the device.
• Store the device in a cool, dry place, away from direct sunlight.
• Do not leave the device in places where the temperature is too high or too low.

Please contact us immediately to order the Yato YT-72985 brake fluid measuring device at the most preferential price!

Yato Tools & Kocu Vietnam: High-Quality Tools for Professionals

Since 2015, Kocu Vietnam has been the proud exclusive distributor of Yato Tools in Vietnam. Driven by the mission to provide high-quality products and optimal solutions, we have partnered with thousands of auto garages, mechanical workshops, and industrial sectors nationwide.

Yato Tools—a renowned brand from Poland—has established its global prestige with over 30 years of experience and a presence in more than 100 countries. Our partnership allows Kocu Vietnam to offer not only European-standard hand tools but also reliable after-sales services, meeting the diverse needs of Vietnamese consumers.

Extensive Product Range (Over 10,000 Items) Yato Tools offers an exceptional variety of products catering to multiple industries:

• Electrical Tools: Multimeters, insulated pliers, and electrical repair kits.
• Automotive & Motorcycle Repair: Socket sets, diagnostic equipment, and air compressors.
• Construction Tools: Drills, cutters, woodworking, and installation tools.
• Safety Equipment (PPE): Safety glasses, gloves, and helmets.
• Measuring Tools: Tape measures and digital measuring devices.
• Hand Tools: Wrenches, screwdrivers, adjustable wrenches, and repair toolsets.

Superior Quality from Yato Tools
Developed on modern production lines, Yato products meet international standards such as CE, ISO, and GS. We guarantee:

• High Performance: Stable operation even in harsh environments.
• Maximum Durability: Made from premium materials with superior strength and wear resistance.
• Safety First: Strict quality control processes before leaving the factory to ensure user safety in all working conditions.

Why Choose Kocu Vietnam?

1. Exclusive Authentic Distribution: All products come with full CO and CQ certifications (Origin and Quality).
2. Reliable Warranty Policy: Ensuring customer rights with official manufacturer warranties.
3. Comprehensive Support: An experienced technical team ready to provide expert advice and assistance.
4. Competitive Pricing: High-quality products at prices that suit various market segments.

Partnership Opportunities – Grow With Us
Kocu Vietnam is currently looking for distribution partners nationwide. This is your opportunity to join the Yato Tools network and tap into the vast potential of a prestigious global brand.
Contact us via Hotline: 0909.85.83.86 for detailed information and attractive incentives.

Contact Information

• Hanoi: 093.631.8800
• Da Nang: 0973.530.520
• Ho Chi Minh City: 0909.85.83.86
• Websites: www.yato.vn | www.kocuvietnam.vn

Kocu Vietnam is more than just a distributor; we are a trusted partner for professional technicians, garages, and workshops across the country. Together with Yato Tools, we commit to delivering top-tier quality, long-lasting performance, and the best support services.

Experience the difference with Kocu Vietnam! Contact us today to become a part of the Yato Tools network in Vietnam.