Yato YT-09741 10x330mm Belt Sander - Poland

Yato YT-09741 10x330mm Belt Sander: Powerful, time-saving sanding solution!

Are you having a headache because manual sanding takes a lot of time and effort? Do you need specialized equipment to help treat surfaces quickly, smoothly and more effectively? Discover now Yato YT-09741 10x330mm Belt Sander, a high quality product from the Polish brand Yato!

Uses of Yato YT-09741 10x330mm Belt Sander:

• Supports sanding metal, wood, and plastic surfaces with optimal smoothness.
• Remove old paint and rust on the surface quickly.
• Polishing small details and hard-to-reach edges.
• Helps save time and effort compared to manual sanding.
• Widely used in mechanical engineering, carpentry, automobiles, and industrial production.

Advantages of buying Yato YT-09741 10x330mm Belt Sander:

• Reputable Polish Yato brand, quality assurance.
• Compact design, light at only 0.78kg, easy to operate.
• Powerful capacity with rotation speed of 20,000 rpm.
• Adjust the head angle for easier surface access.
• Pneumatically operated, ensuring stable performance.
• Low noise and vibration, reducing fatigue during long-term use.

Technical specifications of Yato YT-09741 10x330mm Belt Sander:

• Brand: Yato
• Product code: YT-09741
• Standard: CE (Europe)
• Maximum working pressure: 0.63 MPa
• Recommended working pressure: 0.6 MPa
• Required air flow: 170 liters/minute
• Rotation speed: 20,000 rpm
• Abrasive tape size: 10x330mm
• Air connection diameter: standard
• Air duct diameter: 3/8" (9.5mm)
• Case material: Aluminum
• Adjustable head: Yes
• Sound pressure level: 93.0 ± 3.0 dB(A)
• Sound power level: 104.0 ± 3.0 dB(A)
• Vibration: 4.8 ± 1.5 m/s²
• Weight: 0.78 kg
• Accessories included: Pneumatic belt sander, air hose connector, 3 sanding wires (P60, P80, P120)

Operating principle of Yato YT-09741 10x330mm Belt Sander:

• The machine uses compressed air to rotate the sanding roller at high speed, effectively removing the surface layer.
• When compressed air is supplied, the spindle will operate and move the abrasive belt along the length of the device.
• Users can adjust the head angle to suit each working position.

Product application of Yato YT-09741 10x330mm Belt Sander:

• Sanding of metal, aluminum, and stainless steel surfaces in the mechanical industry.
• Polishing wooden surfaces in the carpentry industry.
• Remove old paint and rust from car body.
• Making molds, polishing welds.

How to use Yato YT-09741 10x330mm Belt Sander:

• Connect the machine to a suitable compressed air source.
• Install sanding wire suitable for the surface to be treated.
• Adjust the head angle if necessary to reach the surface more easily.
• Turn on the operating switch and move the machine gently over the surface.

Assembly instructions for Yato YT-09741 10x330mm Belt Sander:

• Check all included accessories before assembly.
• Install the sanding tape in the correct direction and tighten it.
• Connect the air hose connector to the machine and compressed air source.
• Check operation before official use.

How to preserve Yato YT-09741 10x330mm Belt Sander:

• Clean the machine after each use to avoid dirt sticking to the engine.
• Store in a dry place, avoid contact with water.
• Check the compressed air connection system periodically to ensure safety.

Notes when using Yato YT-09741 10x330mm Belt Sander:

• Use sanding tape suitable for each type of surface.
• Wear protective glasses and a mask when operating.
• Do not operate the machine beyond the recommended working pressure.
• Check the machine before use to avoid problems.

Buy Yato YT-09741 10x330mm Belt Sander now to experience powerful sanding performance, saving time and effort!