Yato YT-17595 Wheel Bolt Thread Repair Kit, 8 Pieces - Standard M12, M14

YATO YT-17595 Wheel Bolt Thread Repair Kit (8 Pieces)

In automotive repair, the thread on the axle and the wheel bolt threads are critical components that bear direct loads from torque and centrifugal forces while the vehicle is in operation. If the threads are stripped, misaligned, or deformed due to excessive tightening, the risk of thread slippage and safety hazards is very high.

Replacing the entire hub or axle assembly can be very costly. The optimal solution is to restore the threads to their original geometric standards using a specialized kit.

YATO YT-17595 is an 8-piece thread repair kit developed by Yato Tools Poland, specifically designed for M12 and M14 metric threads in automotive wheel systems.

Common Issues with Damaged Wheel Threads:

• Stripped threads due to over-tightening
• Misaligned threads from incorrect installation
• Rust buildup causing thread seizing
• Inability to achieve standard torque

If not handled properly, the wheel can become loose, posing a danger during operation.

Solution: The YATO YT-17595 Thread Repair Kit is specially designed to restore common metric threads found in passenger cars and SUVs.

Technical Specifications for YATO YT-17595 Wheel Bolt Thread Repair Kit, 8 Pieces, M12 M14 Standard:

• Brand: YATO
• Product Code: YT-17595
• Number of Pieces: 8 pcs
• Material: Carbon Steel #45
• Thread Type: Metric
• Supported Thread Sizes:
  • M12x1.25 mm
  • M12x1.5 mm
  • M12x1.75 mm
  • M14x1.5 mm
• Application: Repair axle threads, wheel bolts

Components of the Kit:

• 3 thread inserts:
  • M12x1.25 mm
  • M12x1.5 mm
  • M14x1.5 mm
• 4 taps:
  • M12x1.25 mm
  • M12x1.5 mm
  • M12x1.75 mm
  • M14x1.5 mm
• 1 socket head 24 mm

Principle of Operation: The YT-17595 kit operates based on the principle of recreating the ISO metric thread profile through precise cutting processes, completely restoring the original thread geometry.

1. Geometric Basis of Metric Threads:

   • Standard ISO metric threads have:
     • Thread apex angle: 60°
     • Pitch determining the distance between consecutive thread peaks
     • Thread depth calculated according to standard geometric ratios
     • Symmetrical triangular profile
   • When threads are damaged, the following factors are often misaligned:
     • Loss of thread apex
     • Deformation of the thread root
     • Pitch misalignment
     • Loss of thread concentricity

2. Thread Restoration Mechanism Using Taps:

   • The taps in the YT-17595 kit are made from high-hardness carbon steel #45, with cutting grooves precisely aligned to standard thread pitches.
   • When the tap is inserted into the thread hole:
     • The cutting edge removes deformed metal
     • Corrects the thread pitch to standard specifications
     • Restores the 60° apex angle according to ISO standards
     • Recreates uniform thread depth
   • This process ensures that the restored threads achieve:
     • High concentricity
     • Stable geometric accuracy
     • Even contact surface between the bolt and internal thread

3. Torque Distribution After Restoration:

   • Threads that meet geometric standards help:
     • Distribute torque evenly along the entire thread length
     • Reduce localized stress concentration
     • Minimize thread slippage
     • Ensure stable wheel clamping force
   • This is particularly important in wheel systems, where threads endure fluctuating loads and continuous centrifugal forces.

This process ensures precise thread recreation, guaranteeing adequate standard torque without the need to replace the axle.

Practical Applications:

In automotive garages, the YT-17595 is used when:

• Axle threads are damaged due to multiple disassemblies
• Wheel bolts are misaligned
• Hubs have worn threads but do not yet require replacement Instead of replacing the entire assembly, technicians can restore threads on-site, saving significant costs for customers.

In professional repair mechanics, the kit is also suitable for:

• Restoring metric threads on load-bearing components
• Adjusting threads before precise assembly
• Maintaining industrial machinery

Key Advantages:

• High wear resistance carbon steel #45
• Precision machining according to ISO metric thread standards
• Variety of common M12 – M14 thread pitches
• Enhanced safety for wheel systems
• Suitable for professional garages

Usage & Safety Instructions:

• Identify the correct thread pitch before tapping
• Use cutting oil to reduce friction and extend tool life
• Tap in a straight axial direction to avoid misalignment
• Recheck torque specifications according to vehicle manufacturer guidelines

Frequently Asked Questions:

• Is the YT-17595 suitable for inch threads?
  • No. The kit only supports metric threads.
• Can severely damaged threads be completely restored?
  • If there is enough base material to recreate the profile, restoration is possible. Severe cracks require part replacement.
• Is the kit suitable for BMW, Toyota, Hyundai garages?
  • Yes. As long as the vehicles use M12 or M14 threads as specified.
• Is #45 steel hard enough for tapping?
  • Yes. This carbon steel has high durability and wear resistance, suitable for mechanical cutting tools.

Damaged wheel bolt threads do not necessarily mean the entire hub assembly needs replacement. YATO YT-17595 is an effective, cost-saving, and professional thread restoration solution for garages and technicians. Contact us now for consultation and the best price.

Yato Tools & Kocu Vietnam: High-Quality Tools for Professionals

Since 2015, Kocu Vietnam has been the proud exclusive distributor of Yato Tools in Vietnam. Driven by the mission to provide high-quality products and optimal solutions, we have partnered with thousands of auto garages, mechanical workshops, and industrial sectors nationwide.

Yato Tools—a renowned brand from Poland—has established its global prestige with over 30 years of experience and a presence in more than 100 countries. Our partnership allows Kocu Vietnam to offer not only European-standard hand tools but also reliable after-sales services, meeting the diverse needs of Vietnamese consumers.

Extensive Product Range (Over 10,000 Items) Yato Tools offers an exceptional variety of products catering to multiple industries:

• Electrical Tools: Multimeters, insulated pliers, and electrical repair kits.
• Automotive & Motorcycle Repair: Socket sets, diagnostic equipment, and air compressors.
• Construction Tools: Drills, cutters, woodworking, and installation tools.
• Safety Equipment (PPE): Safety glasses, gloves, and helmets.
• Measuring Tools: Tape measures and digital measuring devices.
• Hand Tools: Wrenches, screwdrivers, adjustable wrenches, and repair toolsets.

Superior Quality from Yato Tools
Developed on modern production lines, Yato products meet international standards such as CE, ISO, and GS. We guarantee:

• High Performance: Stable operation even in harsh environments.
• Maximum Durability: Made from premium materials with superior strength and wear resistance.
• Safety First: Strict quality control processes before leaving the factory to ensure user safety in all working conditions.

Why Choose Kocu Vietnam?

1. Exclusive Authentic Distribution: All products come with full CO and CQ certifications (Origin and Quality).
2. Reliable Warranty Policy: Ensuring customer rights with official manufacturer warranties.
3. Comprehensive Support: An experienced technical team ready to provide expert advice and assistance.
4. Competitive Pricing: High-quality products at prices that suit various market segments.

Partnership Opportunities – Grow With Us
Kocu Vietnam is currently looking for distribution partners nationwide. This is your opportunity to join the Yato Tools network and tap into the vast potential of a prestigious global brand.
Contact us via Hotline: 0909.85.83.86 for detailed information and attractive incentives.

Contact Information

• Hanoi: 093.631.8800
• Da Nang: 0973.530.520
• Ho Chi Minh City: 0909.85.83.86
• Websites: www.yato.vn | www.kocuvietnam.vn

Kocu Vietnam is more than just a distributor; we are a trusted partner for professional technicians, garages, and workshops across the country. Together with Yato Tools, we commit to delivering top-tier quality, long-lasting performance, and the best support services.

Experience the difference with Kocu Vietnam! Contact us today to become a part of the Yato Tools network in Vietnam.