Electronic Circuit Board Soldering & Heat Blower 2 in 1 Machine Yato YT-82458

Are you looking for a versatile, easy-to-use and affordable welding machine? Electronic Circuit Welding Machine & Yato YT-82458's 2-in-1 Heat Blower is the perfect choice for you!

Electronic Circuit Welding Machine & Yato YT-82458 2-in-1 Heat Blower is a product from the prestigious Polish brand Yato, designed for applications of soldering SMD and DIP electronic components on printed circuit boards, repairing printed circuit boards, manufacturing electronics, etc. The machine possesses many outstanding features such as:

Electronic circuit welding function:

• Powerful 75W capacity, heats up quickly and maintains a stable temperature throughout the welding process.
• Wide temperature range of 200°C - 480°C suitable for many different types of components and welding materials.
• High temperature stability ±1°C ensures high quality, accurate and consistent welds.
• 900M welding tip is popular, easy to replace and use.
• The temperature adjustment function allows users to adjust the temperature to suit their needs.

Hot air blowing function:

• Powerful 750W capacity, creating a powerful stream of hot air to melt solder or dry printed circuit boards.
• Wide temperature range of 100°C - 480°C suitable for many different uses.
• Adjustable air flow for precise control of temperature and blowing speed.
• Automatic cooling and hibernation function helps save energy and prolong the life of the machine.

Modern, convenient design:

• LED screen displays temperature accurately and clearly.
• Easy-to-use controls
• Sturdy metal holder for soldering iron and hot air blower handle.
• Light weight, easy to carry and use.

Technical Specifications of Electronic Circuit Soldering Machine & Yato YT-82458 2-in-1 Heat Blower

• Product: Electronic Circuit Welding Machine & 2 in 1 Heat Blower
• Brand: Yato - Poland
• Product code: YT-82458
• Type: ESD-safe (Electrostatic safety)
• Capacity:
• Heat blower: 750W
• Welding: 75W
• Voltage: 220-240 V AC
• Frequency: 50 Hz
• Working temperature:
• Blow heat: 100-480°C
• Welding: 200-480°C
• Temperature stability:
• Heat blower: ±2°C
• Welding: ±1°C
• Maximum soldering tip temperature: 480°C
• Air flow: 120 l/min

Function:

• Temperature adjustment
• Automatic cooling and hibernation
• Hibernate the device
• Sensor error detected
• Auto power off
• Dual LED display
• Insulation layer: II
• Weight: 1.88 kg

Product set includes:

• Welding machine
• 4 Air Nozzles (Ø4.4 mm, Ø8 mm, Ø10 mm, Ø12 mm)

Detailed technical specifications

• Design: YT-82458 2-in-1 welding machine has dual digital LED displays, temperature adjustment function and many features to support creating precise welds. The 908D torch assist welder fits popular 900M removable soldering tips and hot air blower handle with brushless controlled blower.
• Dual display: Dual digital display with blue LED backlight shows:
  • Set temperature and actual temperature of soldering iron/hot air nozzle
  • When does the welding machine go into sleep mode
  • Service announcement
  • Heating torch/hot air nozzle operation mode
• 908D Soldering Iron: Placed on a sturdy metal stand
  • Operating voltage of heating element: 24V
  • Welding tip type: 900M
  • Ceramic heating element
  • Cable length: 1m
  • Welding torch weight: about 100g
• Hot air blowing handle:
  • Diameter of faucet holder: 21mm
  • Ceramic heating element
  • Cable length: 1m
  • Handle weight: about 200g
• Heating time: The welding machine reaches an operating temperature of 350°C in about 15 seconds, blowing hot air reaches the temperature in about 10 seconds.

Principle of operation of electronic circuit welding function:

1. Warm up:

• When the welding machine is powered on, the heating element inside the 908D welding torch (900M welding head type) will start to operate.
• 24V voltage is supplied to the ceramic heating element, heating it up.
• The temperature of the heating element gradually increases until it reaches the set temperature.

2. Maintain temperature:

• The integrated temperature sensor inside the heating element continuously measures the actual temperature of the soldering tip.
• The machine compares the actual temperature with the set temperature.
• If the actual temperature is lower than the set temperature, the machine will provide more power to the heating element to increase the temperature.
• On the contrary, if the actual temperature is higher than the set temperature, the machine will reduce the power supplied to the heating element to maintain a stable temperature.

3. Cool (when not in use):

• If the automatic shutdown function after a period of inactivity is activated, the machine will automatically reduce the temperature to the set level (usually 200°C).
• The soldering tip remains at this low temperature until you start using it again.

Principle of operation of hot air blowing function:

1. Warm up:

• When the switch of the hot air blower handle is turned on, the brushless blower inside will start to operate, creating airflow.
• The ceramic heating element inside the handle will also be powered.
• The airflow passing through the heating element will be heated according to the set temperature.

2. Adjust airflow:

• You can adjust the air flow using the adjustment knob on the handle.
• Higher airflow is better suited for applications requiring more heat transfer, while a lower airflow is better suited for more delicate components.

3. Automatic cooling and hibernation:

• When you place the hot air blower handle into the bracket on the welding machine, the blower will continue to operate but at a lower speed to quickly cool the hot air blower to a safe temperature (about 100°C).
• After the temperature drops to the set level, the hibernation function will be activated, automatically turning off the heating element to save energy.

Instructions for using the electronic circuit welding function:

1. Installing the soldering tip: Install the appropriate 900M soldering tip into the 908D soldering iron and tighten it.
2. Power on: Turn on the power switch on the welding machine.
3. Temperature setting: Select the welding temperature appropriate to the type of component and welding material using the temperature adjustment knob.
4. Wait for heating: Wait about 15 seconds for the soldering iron to reach the set temperature.
5. Perform soldering operations: Use a soldering iron to melt solder and connect electronic components on the printed circuit board.
6. Turn off the power (when not in use): If you stop welding for a while, turn off the power to the welding machine to save energy and prolong the life of the soldering tip.

Instructions for using the hot air blowing function:

1. Linstall the air blower nozzle: Install the appropriately sized air blower nozzle onto the hot air blower handle.
2. Power on: Turn on the power switch on the welding machine.
3. Turn on the hot air blower switch: Turn on the switch on the hot air blower handle.
4. Airflow adjustment: Adjust the air flow using the adjustment knob on the handle.
5. Temperature setting: Select the appropriate air blowing temperature for the intended use (removing components, drying circuit boards,...) with the temperature adjustment knob.
6. Air flow direction: Direct the air nozzle to the required area on the printed circuit board.
7. Turn off power and cooling (when not in use):
   • Turn off the air blower switch on the handle.
   • Place the hot air blower handle in the bracket on the welding machine so that the fan automatically cools the air blower nozzle.
   • When the temperature drops to the set level, function

Electronic Circuit Welding Machine & Yato YT-82458 2-in-1 Heat Blower is suitable for use in many fields, including:

Professional:

• Electronic equipment repair: The machine can be used to solder SMD and DIP electronic components on printed circuit boards, repair printed circuit boards, mobile phones, laptops, tablets, etc.
• Electronics manufacturing: The machine can be used to assemble electronic components on printed circuit boards during the manufacturing of electronics.
• Making electronics: The machine can be used to make DIY electronic devices such as robots, recorders, etc.

Education:

• Vocational training: The machine can be used to train students in electronic welding techniques in vocational schools and colleges.
• Educational projects: The machine can be used for STEM education projects in schools to help students learn about electronics and engineering.

Personal:

• Repair of home electronics: The machine can be used to repair home electronics such as televisions, refrigerators, washing machines, etc.
• DIY Electronics Making: The machine can be used to make DIY electronic devices for entertainment or learning purposes.
• Making crafts: The machine can be used to make crafts with plastic, wood or other materials by using the hot air blowing function.

Note:

• The machine is not recommended for applications requiring high precision or soldering sensitive electronic components.
• You should use safety glasses and gloves when using the machine to ensure safety.
• You should read the instruction manual carefully before using the machine.

In addition, the machine can also be used for many other purposes depending on the needs and creativity of the user.

Don't miss the opportunity to own an Electronic Circuit Soldering Machine & Yato YT-82458 2-in-1 Heat Blower today!

Contact now for advice and orders: