Composite Hammer Wrench 2 Hammers 3/4" 2300Nm Yato YT-09575 - Poland

As a professional repairman, you must have experienced the following "sufferings"?
When you need an important tool, you don't have it available, causing work to be delayed.
Using conventional bolt tightening guns makes your hands tired quickly, affecting work efficiency.
After a period of use, bolt tightening guns are often scratched, rusted, or even damaged, affecting the quality of work and costly repairs.

It's time for you to need a new "companion"!

Composite Bolt Tightening Gun 3/4"  Yato YT-09575 is the perfect solution for every repairman:

• 30% lighter than conventional bolt guns: Helps you operate easily and flexibly, reducing hand fatigue during long-term use.
• More durable: High-quality composite shell helps protect the gun from impacts, scratches, and rust, ensuring long service life.
• More powerful: Maximum torque of 2300Nm helps tighten bolts easily, effectively, saving time and effort.

Gift program from Yato tools when you buy Yato YT-09575 Bolt Tightening Gun with 2 Hammers 3/4" 2300Nm:
You will immediately receive a gift combo including:

• An Oxford 600D tool bag Yato YT-74402
• A pair of repair gloves Yato YT-7473
• Program applies until gifts run out.

Yato YT-09575 Composite Bolt Tightening Gun - The ideal "companion" for every repairman cure:

• Increase work efficiency: Helps you complete work faster and more effectively.
• Cost savings: High durability helps you save on repair and replacement costs.
• Improve your professionalism: Show your professionalism at work.

Technical specifications of Yato YT-09575 Bolt tightening gun 2 3/4" Hammer 2300Nm:

• Brand: Yato (Poland)
• Product code: YT-09575
• Standard: CE - Europe
• No-load speed: 7,000 rpm
• Maximum torque: 2,300 Nm
• Type of screw head: Square head
• Screw head size: 3/4" (19.0 mm)
• Quick air connector size: Standard
• Hammer mechanism: TWIN HAMMER
• Reversing switch: Yes
• Maximum working pressure: 0.63 MPa (6.3 bar)
• Average air consumption: 255 liters/minute
• Pneumatic hose inner diameter: 3/8" (9.5 mm)
• Gas connector (PT) size: Standard
• Weight: 3.8 kg
• Length: 229 mm
• Case material: Composite, duralumin aluminum

Product set includes:

• Bolt tightening gun
• Air connector

Noise level:

• Sound pressure: 97.9 ± 3.0 dB(A)
• Sound power: 108.9 ± 3.0 dB(A)

Vibration: 5.75 ± 1.5 m/s²

Principle of operation of Yato YT-09575 2 Bolt tightening gun 3/4" 2300Nm Hammer:

• Yato YT-09575 bolt tightening gun operates on the principle of compressed air. When you pull the trigger, compressed air is pushed from the air compressor into the gun's air chamber. This compressed air will act on the piston, creating a strong thrust that rotates the screw, helping to tighten or loosen the bolt.

Main structure of bolt tightening gun 2 Hammer 3/4" 2300Nm Yato YT-09575:

• Trigger: Used to control the air valve, allows compressed air to enter the air chamber.
• Air chamber: Where compressed air is stored and transmits force to the piston.
• Piston: The part that converts compressed air energy into rotational motion.
• Screw shaft: The part that transmits force to the screw head, helps tighten or loosen the bolt.
• Screw head: The part that comes into direct contact with the bolt.

Two hammers:

• Yato YT-09575 bolt tightening gun is equipped with two hammers (Twin Hammer) to help increase tightening force and tightening speed. These two hammers are arranged symmetrically on the screw shaft, creating a stronger impact force than bolt tightening guns with only one hammer.

User instructions for Yato YT-09575 Bolt tightening gun 2 Hammer 3/4" 2300Nm:

Before use:

• Check: Make sure that the bolt tightening gun and accompanying accessories are intact and working properly.
• Connection: Connect the bolt gun to the air compressor with the air line.
• Choose a screw head: Choose a screw head that matches the size of the bolt to tighten.

Use:

1. Pressure setting: Adjust the compressed air pressure to suit your needs. The recommended pressure for the Yato YT-09575 bolt tightening gun is from 0.63 MPa (6.3 bar) to 0.8 MPa (8 bar).
2. Install the screw head: Install the appropriate screw head into the screw of the gun.
3. Tighten the bolt: Put the screw head into the bolt to be tightened, squeeze the trigger to tighten the bolt.
4. Loosen the bolt: Switch the reversing switch to loosening mode, then pull the trigger to loosen the bolt.

After use:

• Remove the screw head: Remove the screw head from the screw of the gun.
• Disconnect: Disconnect the bolt gun from the air compressor.
• Cleaning: Clean the bolt gun with a clean cloth and store in a dry place.

Notes of tightening gun Bolt 2 Hammer 3/4" 2300Nm Yato YT-09575:

• Use safety glasses and gloves when using a bolt tightening gun.
• Do not use the bolt tightening gun at more than the recommended pressure.
• Do not use a bolt gun to tighten or loosen rusted or damaged bolts.
• Store the bolt tightening gun in a dry place, out of reach of children.

Don't miss the opportunity to own a useful and high-quality tool like the Yato YT-09575 bolt tightening gun! Order today to receive many attractive offers!

Yato Tools – European Quality, Optimal Solutions for Industrial Applications

Yato Tools, founded in 1990 in Poland, is a leading brand specializing in hand tools and industrial equipment. With over 30 years of experience, Yato is present in over 100 countries and offers more than 14,000 products serving industries such as automotive, construction, industrial, electrical, and mechanical repair.

Yato products are manufactured to CE, ISO, and GS standards, ensuring high quality, safety, and exceptional performance. Yato Tools is the top choice for professionals, repair technicians, and businesses that demand reliable tools and long-lasting durability.

Kocu Vietnam is the exclusive distributor of Yato Tools in Vietnam, committed to offering genuine products, reliable after-sales service, and professional technical support.

Contact Us:

• Hotline: +84904613300 (Jessy) | +84936318800 (Taly)
• Website: www.yato.vn