Ampe Kìm AC/DC Yato YT-73092 - Made in Poland

Are you looking for a multi-purpose electrical measuring device, specialized for measuring tasks in civil and industrial electrical systems?

• Difficulty in measuring alternating current without breaking the circuit?
• Need equipment to accurately measure both AC and DC voltage?
• Concerned about the phenomenon of "virtual electricity" in the power system?

Yato YT-73092 AC/DC Clamp Meter - Accurate Measurement Solution for Electrical Technicians
Yato YT-73092's AC/DC clamp meter is the perfect choice for you. The product is designed to measure voltage, current, frequency, resistance and many other parameters quickly and accurately. With TRUE RMS, NCV, and LowZ technology, the device helps you completely eliminate errors caused by noise or virtual electricity, providing reliable measurement results.

Outstanding Advantages of Yato YT-73092 AC/DC Clamp Ampere

• TRUE RMS: Measures the true effective value of current and voltage, ensuring accurate measurement results even when the wave is not sinusoidal.
• NCV (Non-Contact Voltage): Detects AC voltage without touching the wire.
• LowZ: Measures voltage in low impedance mode, eliminating "phantom electricity" in unconnected wires.
• V.F.C. (Low-Pass Filter): High frequency filter, helps accurately measure voltage and current in variable frequency drive (VFD) control systems.
• AUTO Mode: Automatically adjusts the measuring range, helping you save time and avoid equipment damage.
• Safe design: Heat-resistant ABS plastic outer shell, good insulation and integrated automatic shutdown function after 15 minutes of inactivity.

Yato YT-73092 AC/DC Clamp Amp Technical Specifications

Brand: Yato - Poland
Product code: YT-73092
Alternating voltage (AC): 0-600 V
DC measurement voltage: 0-600 V
AC measurement current: 0-600 A
Measurement resistance: 0-60 MΩ
Measuring frequency: 0-60 MHz
Measuring capacity: 0-20 mF
Clamp size: 26 mm
Maximum cable diameter: 18 mm
Display: LCD, maximum 5999 values
Power source: 2 AAA 1.5V batteries Weight: 0.19 kg
Material: ABS
Dimensions: 191x70x31 mm
Overload protection function: Yes
Backlight: Yes
Alarm: Yes

Operating Principle of Yato YT-73092 Clamp Ampere

Yato YT-73092 clamp meter operates on the principle of electromagnetic induction. When clamping the device to a single electrical conductor, the magnetic field generated by the current flowing through the conductor will excite the induction coil inside the clamp meter, thereby measuring the current value without cutting the circuit.

The device uses TRUE RMS technology, ensuring accurate measurement results even when the signal has a distorted waveform. In addition, the NCV function allows voltage detection without direct contact, increasing user safety.

Practical Application of Yato YT-73092 Clamp Ampere

• Check civil and industrial electrical systems: Measure voltage, current and check the continuity of the circuit.
• Repair and maintenance of electrical equipment: Helps technicians quickly detect and fix errors in electrical equipment.
• Check HVAC system: Measure current and voltage in air conditioning, refrigeration and heating systems.
• Driver Check (VFD): Measure the drive's output voltage and current to check performance and maintain the system.

Yato YT-73092 Clamp Ampere User Guide

1. Preparation:

   • Check battery condition and replace if necessary.
   • Select the appropriate measurement mode (AC/DC, voltage, current, resistance, etc.).
   • Make sure the leads are not damaged before measuring.

2. How to Measure Voltage:

   • Select AC or DC voltage measurement mode.
   • Insert the measuring probe into the two poles of the power source.
   • Read the results on the LCD screen.

3. How to Measure Electric Current:

   • Select AC current measurement mode.
   • Clip the clamp meter to the wire to be measured (only measure a single wire).
   • Read the results on the LCD screen.

4. Checking Circuit Continuity:

   • Select Continuity Test mode.
   • Insert the probe into two points of the circuit to be tested.
   • If the circuit is continuous, the clamp meter will sound an alarm.

Yato YT-73092 Clamp Ampere Preservation

• Regular cleaning: Clean dirt after each use with a soft cloth.
• Check the battery: Replace the battery when the device reports low battery to avoid device damage.
• Proper storage: Store the device in a cool, dry place and avoid contact with water or humid environments.

Why Should You Choose Yato YT-73092 AC/DC Clamp Amplifier?

• High Accuracy: TRUE RMS technology and noise filters eliminate errors in complex measurement environments.
• Safe and Convenient: Integrated NCV function helps detect voltage without contact, reducing the risk of electrical accidents.
• Multifunctional: Supports measurement of many different parameters, meeting all electrical testing needs in industry and civil use.
• Genuine Yato Product: Developed by Yato Tools, a famous brand from Poland, ensuring outstanding quality and durability.

Yato Tools – European Quality, Optimal Solutions for Industrial Applications

Yato Tools, founded in 1990 in Poland, is a leading brand specializing in hand tools and industrial equipment. With over 30 years of experience, Yato is present in over 100 countries and offers more than 14,000 products serving industries such as automotive, construction, industrial, electrical, and mechanical repair.

Yato products are manufactured to CE, ISO, and GS standards, ensuring high quality, safety, and exceptional performance. Yato Tools is the top choice for professionals, repair technicians, and businesses that demand reliable tools and long-lasting durability.

Kocu Vietnam is the exclusive distributor of Yato Tools in Vietnam, committed to offering genuine products, reliable after-sales service, and professional technical support.

Contact Us:

• Hotline: +84904613300 (Jessy) | +84936318800 (Taly)
• Website: www.yato.vn