Yato YT-730933 True RMS AC/DC 10mA-1000A Clamp Current Meter - Multifunction

Are you in need of a safe, convenient and highly accurate current measuring device?

• Difficulty in measuring current without being able to disconnect the circuit?
• Worry about measuring errors when using conventional meters?
• Need a device that can measure a variety of parameters such as current, voltage, frequency, temperature?

Yato YT-730933 True RMS AC/DC Clamp Current Meter will be the optimal solution to help you measure accurately, quickly and safely. Equipped with True RMS technology, the meter allows accurate measurement of alternating and direct current, even in circuits with distorted or non-uniform waveforms.

Outstanding Advantages of Yato YT-730933

• True RMS technology: Accurately measures the true effective value of alternating current and voltage, especially important in industrial circuits.
• Non-Contact Voltage Detection (NCV): Helps quickly detect the presence of voltage in wires without touching the wires.
• Automatic range adjustment mode: Minimizes the risk of damaging the device due to choosing the wrong measurement range.
• Measure a variety of parameters: Including AC/DC voltage, AC/DC current, resistance, frequency, temperature, capacitor capacity and diode test.
• Backlit LCD screen: Clearly displays measurement results even in low light environments.
• Data Hold mode: Holds the current measurement value on the screen for easy viewing.

Technical Specifications of Yato YT-730933 True RMS AC/DC Clamp Current Meter

• Brand: Yato - Poland
• Product code: YT-730933
• Alternating voltage (AC): 0-750V
• Directional voltage (DC): 0-1000V
• Alternating current (AC): 0-1000A
• Direct current (DC): 0-1000A
• Resistance: 0-60 MΩ
• Capacitor capacity: 0-100 mF
• Frequency: 0-10 MHz
• Temperature: -30 ~ +1000°C
• Continuity test: 0-50Ω
• Non-contact voltage (NCV) detection: Yes
• Dimensions: 194x75x35 mm
• Material: ABS
• Maximum clamp opening: 25 mm
• Display type: LCD, displays 6000 values
• Power source: 3 1.5V AAA batteries
• Low battery warning function: Yes
• Weight: 0.2 kg

Operating Principle

Yato YT-730933 clamp current meter works by using a clamp sensor to measure current without disconnecting the circuit. The clamp sensor measures the current through the wire by detecting the magnetic field produced by the current flowing through the wire.

When clamped on a wire, the meter will detect the current and display the measurement results on the LCD screen. True RMS technology ensures that measurement results are accurate even when the waveform is inconsistent, such as in circuits containing inverters or switching power supplies.

Practical Application

• Electrical industry: Measuring and checking electrical systems, checking control panels, checking current in wires.
• Industry: Measure current in industrial equipment, check machines and motors.
• Maintenance technician: Detects electrical problems in HVAC systems, home appliances, and industrial equipment.
• Refrigeration: Check and maintain refrigeration and air conditioning equipment.

User Instructions

1. Preparation:

   • Insert the battery into the meter.
   • Select the appropriate measurement mode by turning the adjustment knob or pressing the function button.

2. Measuring current:

   • Clamp the machine to a single wire (do not clamp the entire cable).
   • Make sure the meter has selected the correct AC or DC mode depending on the type of current.

3. Measuring voltage:

   • Use test leads to connect to the wire ends that need to be tested.
   • Make sure the meter has selected the correct AC or DC voltage measurement mode.

4. Continuity and diode test:

   • Select continuity or diode test mode.
   • Connect the measuring probe to the points to be tested and read the results on the screen.

5. Temperature measurement:

   • Select temperature measurement mode.
   • Connect the temperature probe and place it on the surface to be measured.

Storage Instructions

• Clean the device: Clean the meter after each use to remove dirt and grease.
• Battery preservation: Remove the battery from the device if not in use for a long time.
• Avoid impact: Do not drop the meter or leave it in high temperature or humid places.
• Regular check: Make sure the meter and measuring strips are working properly before each use.

Reasons to Choose Yato YT-730933 True RMS AC/DC Clamp Current Meter

• Advanced technology: Using True RMS technology for accurate measurements even in complex circuits.
• Safe and convenient: Non-contact voltage detection increases user safety.
• Sturdy design: Case made from high-quality ABS, impact resistant and heat resistant.
• Reputable brand: Product developed by Yato Tools, a brand from Poland, trusted globally.

ORDER NOW TO EXPERIENCE THE DIFFERENCE!

• Hotline: 0909858386
• Website: www.yato.vn | www.kocuvietnam.vn

Yato Tools – European Quality, Optimal Solutions for Industrial Applications

Yato Tools, founded in 1990 in Poland, is a leading brand specializing in hand tools and industrial equipment. With over 30 years of experience, Yato is present in over 100 countries and offers more than 14,000 products serving industries such as automotive, construction, industrial, electrical, and mechanical repair.

Yato products are manufactured to CE, ISO, and GS standards, ensuring high quality, safety, and exceptional performance. Yato Tools is the top choice for professionals, repair technicians, and businesses that demand reliable tools and long-lasting durability.

Kocu Vietnam is the exclusive distributor of Yato Tools in Vietnam, committed to offering genuine products, reliable after-sales service, and professional technical support.

Contact Us:

• Hotline: +84904613300 (Jessy) | +84936318800 (Taly)
• Website: www.yato.vn